Model: HCE-SN250D 250W
Features:
⊙ Compatible with Intel ATX 12V P4 & AMD processors
⊙ Economical solution
⊙ Auto or manual switch select Input voltage
⊙ Low acoustic noise & ripple
⊙ Remote On/off Control function
⊙ MTBF: More than 50k hours at 70% of full rated load; 25℃ ambient
⊙ EMC: FCC part 15 Class B, EN55022 Class B, EN61000-3-2 Class B
⊙ Safety Certs: TUV, CB, CE, RU, UL
⊙ Dimension:150*86*140mm (W*H*L)
Specifications:
◇ PFC: optional
◇ Operating temp.: +10℃~ +50℃
◇ Transient response: output voltage recovers in less than 1 ms max. following a 25%load change
◇ Hold-up time: t5>17 mS at 100% Load
◇ Humidity: 5~90% RH
◇ Efficiency: 65% min. 68% typical, at full load
◇ P.G. signal: 100mS
◇ P.F. Signal: 1mS MIN
◇ Over Load Protection: +5V:26A-36A /32-40A/ 38-45A
◇ Over Voltage Protection: +5V:6.8V,+3.3V:4.5V,+12V:15.6V
◇ Short Circuit Protection: All output to GND
◇ Hi-Pot: Voltage 1500Vac, Time 2-3 Sec. cut off current 10mA MAX.
Input:
Input voltage range: 90-135/180-265Vac
AC Input: 230Vac(180-264)/115Vac(90-132)
Frequency : 47Hz-63Hz
Current: 4.0A(MAX.) At 230Vac; 7.0A(MAX.) At 115Vac
Inrush Current: Max 70A at 230Vac COLD START AT 25℃ ambient
Output:
|
Voltage |
+3.3V |
+5V |
+12V |
-5V |
-12V |
+5Vsb |
|
Full Load |
14.0A |
21.0A |
14.0A |
0.30A |
0.50A |
2A |
|
Low Load |
0.30A |
0.3A |
1.0A |
0A |
0A |
0A |
|
Peak Load |
16.0A |
|
16.0A |
|
|
2.5A |
|
Regulation |
±5% |
±5% |
±5% |
±10% |
±10% |
±5% |
|
Ripple |
50mV |
50mV |
120mV |
100mV |
120mV |
50mV |
|
Noise |
120mV |
120mV |
240mV |
240mV |
240mV |
100mV |
